SPORTident

BS8-D Time Master

The SI-Master BS8-D is an extended SI control. In addition to being able to be programmed by you like any other control, it can also be used as a Time Master, and as an Extended Time Master. A Time Master allows the quick setting of the real-time clocks in other controls. As Extended Time Master it additionally clears the backup memory of the other controls. See the downloads section below for more info.
$220.00

BSF8

The BSF8 Timing Control comes as either a "display top" (DT) unit or a "display bottom" (DB) unit. This distinction refers to the location of the LCD readout on the control - either on the top or the bottom of the unit. In general, if a control is to have a control code sticker on its top surface, the "display bottom" unit is recommended. The DB unit is available in blue or red. The DT unit is available in blue only. Every control station you order will come with a control sticker of your choice.
$145.00

BSF9

With much improved physical changes, this new control station functions identically to its predecessor, the BSF8. See below for details. Every control station you order will come with a control sticker of your choice.
$155.00

BSM-7-D-RS232

Serial Port based main station Allows programming of controls, downloading of fingerstick information
$168.00

BSM-7-USB

Main station with USB interface to computer. Allows programming of controls and downloading of finger-stick information See the downloads section below for a document describing the features of this control.
$158.00

BSM8-D-USB

Download station with USB interface to computer. Allows programming of controls and downloading of finger-stick information. This unit does not contain an internal battery, it is powered by the USB port. It features very low power consumption, the laptop battery will not be stressed. The unit will retain all downloads even if the unit is unplugged for a while.
$152.00

ComCard Pro

Moscompass compass with built-in SI-10. Choose your compass module and orientation (left vs right).
$128.00

ComCard Up

Moscompass compass with built-in SI-8. Choose your compass module and orientation (left vs right).
$100.00

Coupler

This coupler is needed to enable communication between a USB or RS232 main station and a control. Insert the coupler into the hole of the main station and lay the control on top of the main station. The control will send the RF signal from the one control to the other.
$3.50

Mounting holders for BS7 or BS8 controls

The older, larger BS7s and the smaller, newer BS8s each have two options for mounting holders. One is the bracket - a piece that runs lengthwise, with the control snapping into place. The other is the plate - a piece the size of the base of the control, into which the control snaps.
$3.75

RS-232 Serial to USB Adapter

This adapter has been tested and works well with SPORTident equipment on XP (SP3) and up (tested on XP [32-bit], Windows 7 [64-bit] and Windows 8.1 [32-bit]). Drivers are native in Windows 7 and up (possibly also Vista). The latest drivers can be downloaded from href=http://server.iad.liveperson.net/hc/s-21882319/cmd/kbresource/kb-2791656651557503245/view_document!PAGETYPE?sq=26886 Note the files on the right near the top, and click on the appropriate file icon
$35.00

SI pCard Timing Chip Set

The pCard timing chip is ideal for groups and events where the number of controls is always small. pCards are suitable for school orienteering and for Enduro races. pCards come with a wrist safety strap. They hold a maximum of 20 controls, including any errors or duplicate punches so we recommend only using for events with 15 or fewer controls.
From $17.00